Expert Plumbing Services in Sandpoint, Idaho

In the cold weather, water can freeze within your pipes and cause the pipes to break. A broken pipe can cause flooding and significant water damage in your space if it’s not repaired immediately.

If you have found a broken pipe, the beginning step is to disable your home’s water store. You’ll accomplish this at the main water shutoff valve, which is usually situated in your utility area or basement. Moving the valve clockwise will shut off the water.

Then contact our pros at 208-603-2210 right away. If it’s behind a partition, in your lawn or under your house’s foundation, we’ll be able to locate the leaking pipe and mend it quickly.

If you aren’t using more water than typical and your payment doubles, there’s a good chance you have a water leak. Sometimes your dues will go up just a little bit. It’s more difficult to detect but will generally become more obvious as the leak gets larger.

It can be hard to uncover a water leak without pro assistance. Nevertheless you can check your water meter to find out if the leak is inside or outside your home.

Some mildew is usual in humid rooms like bathrooms. However it’s not typical to find big amounts developing on a non-shower wall, the ceiling or on baseboards, especially if these surfaces feel flexible to the touch.

A leaky pipe can make walls, ceilings and floors to feel soft or drop. It could also leave water stains on surfaces.

These problems can occur in spaces with poor air circulation or high humidity. But they’re especially problematic if you are enduring other signs of a leaky pipe, like mildew or moldy smells.

Stagnant water can make an area smell musty. If the area also has wet walls or floors, you possibly have a water leak.

Your fixtures can back up sewer water and cause damage when the water compression drops in your house. This can be caused by a broken backflow preventer, sewer line damage or other city issues. Contact us at 208-603-2210 at the earliest sign of backflow and we’ll get it fixed fast.

A variety of things can be the issue when your water pressure is low. There may be a block in your plumbing fixture. It could also be caused by a faulty water heater or a leaky pipe.

If you have a boiler with a tank, it has a finite capacity for hot water. If you’re experiencing cold water when you have not used a lot of hot water, something may be wrong. Your water heater could be dripping, malfunctioning or need to be updated.

An obstruction is probably to be the reason when your sink or shower is draining too slowly. We’ll use a special tool like a drain snake to unclog and get your sink and shower draining efficiently again.

If your toilet’s tank seal fails, it will signal the tank to continue refilling. A toilet that continues refilling can suddenly drive up your water fees.

Your water should be translucent.

Don’t worry if it comes out dirty once in a while, as this usually just means there’s air in the water supply. If you find particles settling at the bottom of your glass, you should have your water tank inspected.

Water that’s any other color can be dangerous to your body. Below are a few issues that can cause your water to be discolored:

• Brown, red or yellow—This is often caused by a water main break in your location. It could also mean your pipes are deteriorated.
• Green or blue—This is extremely serious, since it means your pipes are probably corroded. Your water can taste brassy or bitter because of a high quantity of copper or lead. Long-term exposure has been linked to serious health challenges in adults and children, such as intestinal illnesses, cancer and seizures.

If you’re experiencing discolored water or sediment in your water, call us at 208-603-2210 and we’ll diagnose the concern.

If your toilet’s tank seal fails, it will signal the tank to keep refilling. A toilet that keeps refilling can rapidly drive up your water dues.